Top 10 best rated cheap  Clamp Meters reviews to buy

Best Clamp Meters to Buy in 2020 [Updated]

Last updated: Mar 20, 2020 By Jamie


top rated Models tested 36 Models Considered
hours of research 42 Hours of Research
experts interviewed 13 Experts Interviewed
best Reviews Analyzed 86 Reviews Analyzed

If you’re questioning, what is the Best Clamp Meters for Daily Use? You’re at right place. Well finding the good one isn’t an easy task. So we’ve consulted top experts who has in and out knowledge about it. After testing a couple of products, our team listed down top 10 valuable items which performed a lot better than the rest hundreds of options.

Our team spent tons of hours in order to find out the best option available right now in the USA market. An increasingly popular option is a Etekcity MSR-C600, which is unbeatable in case of reliability and performance. However, if you have a low budget or wanna save some bucks, you can check out Fluke 323. In both, you’ll get all those features which you expect in Clamp Meters.

To ease your work and save your time, we created a comparison table of Top 10 Best Selling Clamp Meters. All the products are sort based on expert’s reviews.

Top 10 Best Clamp Meters Reviewed : Top Selling in USA 2020


1st Place

Etekcity MSR-C600
Etekcity MSR-C600

By Etekcity

9. 7

Check Price

Best Value

Fluke 323
Fluke 323

By Fluke

9. 5

Check Price
Meterk MK06
Meterk MK06

By Meterk

9. 1

Check Price
Signstek UT210E
Signstek UT210E


8. 8

Check Price

By General Technologies Corp

8. 6

Check Price
UEi Test Instruments DL369
UEi Test Instruments DL369

By UEi Test Instruments

8. 2

Check Price
Amprobe AMP-210
Amprobe AMP-210

By Amprobe

8. 0

Check Price
Mastech MS2115A
Mastech MS2115A

By KKmoon

7 .7

Check Price
Milwaukee 2235-20
Milwaukee 2235-20

By Milwaukee

7. 4

Check Price

Check Price

Top 10 Best rated Clamp Meters in USA 2020 : Read Detailed Reviews

For convenience, we have listed down the Top 10 Best Clamp Meters of 2020 which we reviewed.

After investing a lot of time, here we list down top Best Clamp Meters with their Key Features. All of them are crushing the USA market. Without any further delay, let’s check them out:-

#1 Etekcity MSR-C600 – Best & Top rated Clamp Meters

Etekcity’s Digital Clamp Mustimeter ensures household electricity maintenance safe and easy With the capability to test voltage, resistance, continuity and diodes, the built-in clamp enables you to measure AC current without direct dangerous contacting The clip can extend to test cords and wires up to 28 mm in diameter.

best Etekcity MSR-C600 reviews
Key Features
  • Make sure this fits by entering your model number.
  • Accurately measures acdc voltage only for ac current not for dc current resistance and also provides diode and continuity tests
  • Jaw opening the clamp measures the ac current in a conductor up to 26mm without interrupting the circuit
  • Additional features data hold max reading and an easy to read large lcd
  • Easily carrying comes with a handy carrying pouch perfect for use while youre on the go
  • Sleep mode automatically enters sleep mode after 15 minutes of inactivity for energy conservation
  • 2 year warranty 1 year buyer assurance with a free option to extend it by 1 more year and lifetime support from etekcity

#2 Fluke 323 Clamp Meters 2020

Style:Standard The Fluke true rms clamp meter is a great clamp meter for general, grab and go troubleshooting needs The Fluke 323 323 AMZN is ideally suited for current measurements up to 400 a in tight cable compartments.

cheap Fluke 323 2020
Key Features
  • Make sure this fits by entering your model number.
  • Digital clamp meter measures ac current to 400 amp ac and dc voltage to 600v and resistance to 4 kilohms. does not measure dc current
  • True rms sensing meter provides accurate readings when measuring linear or non linear loads regardless of waveform
  • Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit
  • Audible continuity sensor confirms that the circuit conducts electricity
  • Meets iec safety standard 61010 1 and is rated for cat iv installations to 300v and cat iii installations to 600v

#3 Meterk MK06

You may also like to read about Best White Noise Machine

powerful Meterk MK06
Key Features
  • Make sure this fits by entering your model number.
  • Multi purpose clamp meter with true rms auto range accurate acdc voltage acdc current frequency duty cycle diode capacitance and resistance measurement.
  • With ncv live line test function non contact voltage detection function with a sensor to detect voltage and avoid electric shock without touching any wires. light and sound alarm if detects the ac voltage90v 1000v or live wire
  • Continuity test overload protection designed to safely and accurately confirm the circuit conducts electricity with low voltage indication and overload protection. light alarm if detects the ac voltage90v 1000v or live wire.shows ol on the lcd if overload
  • Easy to use and read small and portable to carry and use. high resolution large backlit lcd screen improves visibility. the flashlight can access measurement in a dark place. low battery display.widely used in your life.
  • You will get meterk digital clamp meter 2test leads 3aaa batteriesinside the clamp meter user manualenglish french german italy spanish 1 storage bag

#4 Signstek UT210E 2020

Features: Display Count: 2000 Auto Range: √ Jaw Capacity: 17mm True RMS: √ Diode: Around 30V VFC: √ NCV: √ Data Hold: √ Zero Mode: √ LCD Backlight: √ Auto Power Off: Around 15 Minutes Continuity Buzzer: √ Low Battery Indication: ≤25V Input Protection: √ Input Impedance for DCV: ≥10MΩ Specifications: Model:UT210E AC Current (A):2A/20A/100A ±(2.

reliable Signstek UT210E
Key Features
  • Make sure this fits by entering your model number.
  • Continuity buzzer
  • Auto power off around 15 minutes
  • Low battery indication
  • Data hold
  • Zero mode

#5 GTC CM100 Cheap and affordable

GTC 1 mA to 100 Amps AC/DC low current clamp meter is designed to accurately measure current, current leaks (parasitic draws down to 1mA) and electrical loads from 1mA to 100 amp AC/DC and voltages from 0 to 600 AC/DC The small diameter (½ inch or 13mm) and narrow jaw makes it ideal for use in confined spaces and on small gauge wires.

top selling GTC CM100
Key Features
  • Make sure this fits by entering your model number.
  • Acdc current measurement from 0.001 up to 100 a. which makes it a great tool for measuring parasitic draws and acdc voltage measurement up to 600 volt
  • Small jaw 1.2 inches w x 0.53 inches d 300×13.4millimeters with clamp opening up to 12 inch 12.5 millimeters
  • Peak and data hold functions with one rotary switch operation
  • 2 readings per second sampling and continuity check with audible indicator
  • Test leads soft carrying deluxe pouch and batteries included

#6 UEi Test Instruments DL369

Size:1-(Pack) Product Description The PHOENIX Clamp-On Meter series starts with the DL369, the perfect meter for contractors who need basic features without all the extras Great for general troubleshooting and electrical maintenance, this isn’t just a stripped down model, the PRIME is a fully functional tough meter made to get the job done From the Manufacturer UEi Test Instruments has over 50 years’ experience designing and manufacturing a broad range of award-winning, industry-leading Test and Measurement Tools.

top best UEi Test Instruments DL369
Key Features
  • Make sure this fits by entering your model number.
  • Digital clamp on meter with test leads pouch
  • Test lead storage
  • 750vac1000vdc 4000f capacitance 2000 a acdc
  • Non contact voltage 400a ac minmax
  • 40m resistancecontinuity frequencyduty cycle diode test

#7 Amprobe AMP-210

You may also like to read about Best Solar Charge Controllers

buy Amprobe AMP-210
Key Features
  • Make sure this fits by entering your model number.
  • True rms
  • Capacitance measurement for start and run motor capacitors
  • Safety rated cat iii 600 v amp 310 amp 320 cat iv 600 v cat iii 1000 v amp 330

#8 Mastech MS2115A

Style:AMP-210: AC Electrical Clamp Meter Amprobe products range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals All Amprobe tools undergo rigorous testing to ensure full compliance with the latest IEC and CE safety regulations in Fluke Safety labs for quality and safety you can trust.

mini Mastech MS2115A
Key Features
  • Make sure this fits by entering your model number.
  • Mastech multimeter ms2115b
  • Ac digtial clamp meter
  • Fast delivery time
  • Mastech multimeter ms2115b ac digtial clamp meter
  • Brand new and high quality item

#9 Milwaukee 2235-20

Product Description: AC voltage / current measurement True RMS; Data Hold; MAX/MIN value measurement; REL Test; Non-contact voltage detector function; Display Backlight / Flashlight / Work Light function; Low Battery Display; Inrush Current Test Package list: 1 * Original MASTECH MS2115A AC/DC Digital Multimeter Clamp Meter 1 * Portable bag 1 * Test Cable 1 * Instruction manual Battery(Not Included).

best Milwaukee 2235-20 reviews
Key Features
  • Make sure this fits by entering your model number.
  • The product is easy to use
  • The product is durable
  • The product is manufactured in taiwan
  • Voltage range 600v acdc safety category rating cat iii 600v trms yes ac amps 400 amps ac volts 600 volts dc volts 600 volts ohms 4000 ohms auto calibration no recommend sending in for calibration service once every year
  • Minmaxavgdif minmax continuity yes backlight yes hold yes minmax yes jaw size 1.0 inch display black on white display led flashlight yes rugged overmold yes switch type dial battery alkaline
  • Thin jaw profile for easier wire measurement in panels or in bundle
  • Built in led work light
  • Includes 2235 20 clamp meter one 1 electrical test lead set red and black two 2 aaa batteries manual


Product Description CLAMP METER 400 AMP The product is easy to use The product is durable The product is manufactured in Taiwan From the Manufacturer Heavy duty True-RMS electrical current tester for professional residential, commercial, and industrial applications The perfect tool for the professional electrician; includes all the features that are needed to get the job done in the field, on-site or in the plant.

best selling
Key Features

    Buying Guide: How to Buy the Best Clamp Meters

    It’s not easy to buy something which you never used before. That’s why tested huge numbers of Clamp Meters and choose the most efficient and reliable ones for you.

    In today’s era, it is quite difficult to buy any product without having much knowledge. We penned this guide to help you in buying the Best Clamp Meters.

    1. Quality and Durabiity

    The durability of Clamp Meters represents the ability to withstand and function effectively even in not suitable conditions. The durability ensures long-lasting nature without any damage to the product. Moreover, the maintenance of the item depends on its type and frequent usage.

    2. Brand Reputation

    One of the most important thing to look in a Clamp Meters is brand. Before investing any more, it is better to choose a brand that determines decent product quality and service levels.

    However, you will find a few main brands that are dominating the Clamp Meters market. These brands not only stand above the others, but have a reputation for creating quality products. We dug into the consumer reviews for models made by each brand to get a clearer idea of what customers think about their products.

    3. Value for Money

    The price will differ for different types of Clamp Meters. So, always choose the best that perfectly suits your needs and requirements. If you have a low budget then choose the one which price less and offers more convenience to users.

    4. Warranty

    It is always suggested to buy Clamp Meters with a warranty period as you can always replace it with a new product if you find any fault in the device. If not warranty, you should check for return policy so that you do not waste your money on a product that is not effective enough.

    How we Tested?

    Testing a four-five items is easy, but more than that isn’t. To make the whole process easy and to get decent some # at the end, our team simplify the testing procedure by divided into steps. Here are they:

    1. Make a List

    Initially, one of our team member creates a list of all the items available for shipping in the United States. It also includes the products which are available in local stores and malls. So, we only choose those which are available for you.

    2. Sort out the Best selling # in USA

    Sorting out the listed items on some necessary criteria, make the process more easier. Some factors which we must include in every item is Brand Trust, Value for Money and Reliability. Also, we contact with some retailers to know about product’s good and bad things.

    3. Apply Filters

    Filters always make it easy for us to find best, isn’t it? So we applied couple of filters like Popularity among customers, Features, Brand Trustness, Price, Durability, and many more. And finally we give the sorted products to our team to start testing.

    4. Assign the Task

    We have multiple team squad for distinct types of testing, like separate team for testing strength, performance, durability. The Manager assign the the task among then. And finally the results get reviewed by experts and sorted down the best ones.


    I am confident one of these will meet your needs.

    Now, we have to come to the ending part of the buyer’s guide. As you have already read about the Best Clamp Meters, it is now time for you to embark on your shopping jaunt.

    If you’re looking for something even cheaper, the Fluke 323is a budget-friendly underdog that keeps up with the pack.

    Have a Great Day!